Solutions to the Failures of Sawdust Rotary Dryer

     Date: 31-07-2015     From: Fote Machinery     Author: Fote Machinery

If material in sawdust rotary dryer catches fire, there are four possible reasons. First, the sawdust dryer machine is out of specification. Since the equipment is small and materials needing to be dried are many, materials will be ignited if users still increase the temperature. Second, the sawdust drying machine has something wrong with its design principle. The solution is to change the machine with a new one. Third, the air pressure is too weak to blow away materials. Users should properly increase the wind pressure, basing on the perfect installation and no air leakage. Fourth, users operate the sawdust rotary dryer in a wrong way. To solve the problem, users should learn right operational methods strictly according to the instruction books.

If the barrel in sawdust rotary dryer vibrates strongly, there are at least two reasons. The first one is the breakage in the connection place between bracket wheel and foundation. Under this circumstance, just to correct and reinforce the connection is OK. The second one is the wear condition on the side of roller ring. To solve this problem, users can change the roller ring with a new one. The humidity between dried materials is uneven. Under such circumstance, users should break up the briquettes into pieces before drying.

If the fuel for driving the sawdust drying machine is wasted a lot, users should improve the insulation performance of material by adding some thermal insulation materials. Maybe the above problem is caused by the design. Thus when clients choose sawdust dryer machine, certain precautions are needed. As a professional sawdust dryer manufacturer, Fote Heavy Machinery sincerely welcomes you to come for site visit. If you need our products, please leave messages on our website: http://www.ft-dryer.com. We will contact with you as soon as possible. Thank you!