Superior Advantages of Fote Slag Dryer

     Date: 21-08-2015     From: Fote Machinery     Author: Fote Machinery

The slag dryer, also named as fluorite ore dryer or gold ores dryer, is widely used for materials with high humidity like grain slag, blast furnace slag, coal ash, coal cinder, slag, carbide slag, limestone, clay, river sand and silica sand, etc. If you are in the field of mining or want to start business with slag material, slag dryer will be definitely a good helper for you. Firstly, it has relatively high working capacity and strong overload capacity. Since the thermal efficiency is rather high in slag dryer, the coal consumption can decrease for about 20% and the whole drying cost is reduced a lot.

Since the interchangeable gears forged with pin columns are mainly used for transmission, which can take the place of traditional gears forged with steel, the cost and time for maintenance save a lot. In order to get the best drying effect, the drying way in down-stream is used, which means that raw materials and hot air enter into the rotary drum from the same end. the slag dryer has low temperature at the discharging end and high thermal efficiency inside.

Since the inner structure of slag dryer realizes innovations, the cleaning and heat conduction function for dispersed materials are intensified and the sticky phenomenon on inner wall of drum is eliminated. Newly feeding and discharging devices are used, which completely eradicate the phenomena of uneven feeding, discontinuous feeding and feeding blocking, etc. Besides, the newly devices reduce the load on dedusting system.

The slag dryer can satisfy the demands of various users for the particle size and water content in finished products. If you need our products, please click the website and leave messages on it: http://www.ft-dryer.com. Professional personnel in our company will contact with you as soon as possible.