Introduction to Advanced Sand Making Production Line

     Date: 18-06-2014     From: Fote Machinery     Author: Fote Machinery

The sand washer refers to a bucket type washing apparatus which can clean and separate the rock flour and clay from the sand and stones.

When the sand washer’s motor drives the impellor to rotate slowly, the sand enters the washing trough via the feeder and begins to roll driven by the impellor. The impurity covering the sand surface will be removed and at the same time the water vapor covering the sand particles will be damaged to realize the dehydration effect. Meanwhile, adding water to the sand will form a strong water flow which can take away the impurity and little proportion materials. Then the clean sand is transferred to the discharging chute via the rotating impellor, thus finishing the cleaning process.

Because of its original sealing structure and reliable transmission gear, the sand washer can realize the best cleaning and dehydrating effect by working together with the sand maker whose excellent performance helps us win customers’ trust and praise all over the world.

The sand maker works as follows: materials enter the crusher via the feed hopper and are divided to two parts. Then the materials are thrown out from three runners and impact the falling materials from the distributor. Then they come to the lining of the inner cavity and get bounced by the material liner to the upper end of the whirling motion cavity. The materials cast from the impellor form a continuous material curtain. The crushed materials are discharged from the bottom hole. Forming a closed circuit with the circulation screening system, the vibrating feeder can handle the materials as fine as 20m within three circulations.