Frequent Checks for Coal Slime Dryer

     Date: 29-09-2015     From: Fote Machinery     Author: Fote Machinery

Coal slime dryer, also named as sludge dryer, is mainly used to dry materials like slime, raw coal, slag, clay, bentonite, limestone, sand, metal concentrate and tailing, etc. Dried sludge, as an alternative of natural coal, can effectively help you to lower the production cost and improve the economic benefits. Since the dried slime has some special compositions inside, it can be widely used for chemical engineering. More over, the dried slime can be mixed with other materials for manufacturing the civil-use coal briquettes. The following content will discuss about several matters that users should pay much attention to when operating the sludge dryer machine.

Belts and screws for driving and fixing the parts of coal slime dryer should be often checked. Stable working of them is of high importance to the performance of whole sludge dryer. As we all know, continuous working of coal slime dryer is inseparable from the frequent lubrication. Operators should often lubricate the key parts of sludge dryer with lubricating grease or machine oil. As qualified operators, they should be sensitive to any abnormal noises or sounds of coal slime dryer. If there exist any abnormal noises or sounds, operators should shut down the machine immediately.

Since there are some easy-wearing parts in the coal slime dryer, operators should often check the wearing condition of these parts. If some of them are badly worn out, operators should change them with new ones. If fire in the furnace is not completely put out, operators should not leave immediately. Or else, the fire would ignite some parts of coal slime dryer. With regard to the daily overhaul and maintenance, switches should turn off firstly to ensure the safety. Fote sludge dryer price: http://www.ft-dryer.com/products/Coal-slime-dryer.html.