Common Failures of Rotary Sand Dryer

     Date: 05-09-2015     From: Fote Machinery     Author: Fote Machinery

Sand rotary dryer, with another name of sand dryer machine or rotary sand dryer, is mainly used to dry materials like river sand, artificial sand, silica sand, yellow sand, mineral sand, mineral powder, grain slag, blast furnace slag, coal ash, coal cinder and so on. While, after long-term utilization, the sand rotary dryer has more or less problems. If you hear an explosive sound in sand rotary dryer, two reasons should be thought about. One is the excessively high drying temperature and the other is the blocking in rotary sand dryer. When it refers to the high drying temperature, ignition is easy to occur, so it is necessary to lower the temperature. As to the blocking, as long as you clean the machine regularly, it is easy to be eliminated.

After the long-term utilization of sand dryer machine, the finished products can not be discharged out smoothly or naturally. Reasons for the discharging failure are wrong installation and poor wind pressure. What you can do is to check the installation according to the drawings and papers. As a result of air leakage, poor wind pressure can be resolved by finding out the leakage places and deal them one by one.

With the service tenet of being responsible for every procedure, every product and every customer, Fote always regards the customer as God and quality as life. If you want to work with us, please leave messages on the following website or directly email us: http://www.ft-dryer.com. We will reply to you as soon as possible. If you have any question about our products, leaving messages on that website is OK. We will take them sincerely. Welcome you to come for site visit and inspection.