Processing capacity: 3-22t/h
Cylinder volume: 25.2-136m³
Motor power: 4×5.5-4×30kw
Weight: 34-158t
Application Fields: chemical engineering industry
Applicable Materials: petroleum coke
We Fote have a long history of developing petroleum coke dryer, and we understand how to give you the ultimate setup for maximum productivity and profitability.Today we Fote have thousands of petroleum coke dryers in operation around the world including the leading HG petroleum coke dryer series.The knowledge we gain is passed on to you in the form of refinements and valuable advice.The petroleum coke dryers is one of the largest rotary drying systems we design. We provide on-site start-up and training by our professional staff to assist in installation. This level of service ensures that your system works correctly and efficiently after installation.
The FTM® petroleum coke dryer is also known as coke dryer, it can dry materials with moisture of 90% into finished products and it is dedicated drying equipment for the petroleum coke and other materials.
Petroleum coke dryer or coke dryer is suitable for drying slurry, coal, coke powder, petroleum coke and other materials.
1. Petroleum coke dryer has high technology, self-cylinder insulation and high thermal efficiency.
2. Petroleum coke dryer can reduce construction area of the plant and save engineering investment.
3. Coke dryer has a long working life and is easy to maintain.
4. Coke dryer has high thermal efficiency; the outer cylinder temperature is below 60 ℃; outlet temperature is low; the discharged material temperature is below 60 ℃.
5. The low outlet temperature is helpful to prolong the working life of the dust-cleaning apparatus and can be directly equipped with air box pulse bag filter.
Coke dryer uses the flue gas produced by Cowper stove, through the pipeline and high temperature induced draft fan, the high temperature flue gas can be sent into the blast furnace to pre-dry the coke and make the coke moisture down to 6% from 11% when it is sent into the furnace, thus can reduce the negative influence of the coke powder, coke moisture fluctuations to furnace and improve the gas heat value and temperature.Note: The final moisture of 1% only can be achieved when the matching system is reasonably and correct. Specific models are based on actual moisture content of raw materials.
Spec./m
(Dia.×Length) |
Shell Cubage
(m³) |
Capacity
(t/h) |
Installation
Obliquity (%) |
Highest Inlet
Air Temperature (℃) |
Main Motor
(kw) |
Weight
(t) |
Φ1.2×8.0
|
9.0
|
1.9~2.4
|
3~5
|
700~800
|
7.5
|
9
|
Φ1.2×10
|
11.3
|
2.4~3.0
|
3~5
|
700~800
|
7.5
|
11
|
Φ1.5×12
|
21.2
|
4.5~5.7
|
3~5
|
700~800
|
15
|
18.5
|
Φ1.5×14
|
24.7
|
5.3~6.6
|
3~5
|
700~800
|
15
|
19.7
|
Φ1.5×15
|
26.5
|
5.7~7.1
|
3~5
|
700~800
|
15
|
20.5
|
Φ1.8×12
|
30.5
|
6.5~8.1
|
3~5
|
700~800
|
18.5
|
21.5
|
Φ1.8×14
|
35.6
|
7.6~9.5
|
3~5
|
700~800
|
18.5
|
23
|
Φ2.2×12
|
45.6
|
9.7~12.2
|
3~5
|
700~800
|
22
|
33.5
|
Φ2.2×14
|
53.2
|
11.4~14.2
|
3~5
|
700~800
|
22
|
36
|
Φ2.2×16
|
60.8
|
13.0~16.2
|
3~5
|
700~800
|
22
|
38
|
Φ2.4×14
|
63.3
|
13.5~16.9
|
3~5
|
700~800
|
37
|
45
|
Φ2.4×18
|
81.4
|
17.4~21.7
|
3~5
|
700~800
|
37
|
49
|
Φ2.4×20
|
90.4
|
19.3~24.1
|
3~5
|
700~800
|
45
|
54
|
Φ2.4×22
|
99.5
|
21.2~26.5
|
3~5
|
700~800
|
45
|
58
|
Φ2.6×24
|
127.4
|
27.2~34.0
|
3~5
|
700~800
|
55
|
73
|
Φ3.0×20
|
141.3
|
30.1~37.7
|
3~5
|
700~800
|
75
|
85
|
Φ3.0×25
|
176.6
|
37.7~47.1
|
3~5
|
700~800
|
75
|
95
|
Φ3.2×25
|
201
|
42.9~53.6
|
3~5
|
700~800
|
90
|
110
|
Φ3.6×28
|
285
|
60.8~76.0
|
3~5
|
700~800
|
160
|
135
|
Technical parameters of indirect heat dryer:
Shell diameter ×shell Length Items |
Inside diameter of outer shell (mm) |
Inside diameter of inner shell (mm) |
Shell Length (m) |
Shell cubage (m³) |
Shell obliquity |
Lifting blade form |
Highest inlet air temperature (℃) |
Dimensions (m) |
Φ1.5×15m | 1500 | 500 | 15 | 20.27 | 3-5% | Lifting form | 850 | 16.2×2.7×2.7 |
Φ1.5×17m | 17 | 22.97 | 18.2×2.7×2.7 | |||||
Φ1.5×19m | 19 | 25.68 | 20.0×2.9×2.9 | |||||
Φ1.8×21m | 1800 | 650 | 21 | 35.91 | 3-5% | Lifting form | 850 | 22.5×2.7×2.7 |
Φ1.8×23m | 23 | 39.33 | 24.5×2.9×2.9 | |||||
Φ1.8×25m | 25 | 42.75 | 26.5×2.9×2.9 | |||||
Φ2.2×21m | 2200 | 800 | 21 | 58.10 | 3-5% | Lifting form | 850 | ---- |
Φ2.2×23m | 23 | 63.61 | ||||||
Φ2.2×25m | 25 | 69.15 |
China Fote Machinery Co., Ltd. Add: High and New Industrial Zone, Kexue Avenue, High and New Technology Industrial Development Zone, Zhengzhou, China.
Phone: 0086-371-63313738 Mobile Phone: 0086-18039114854 Email: market@sinoftm.com SiteMap: Sitemap