Production capacity: 0.5-40t/h
Power: 3-75kw
Weight: 2.9-104.9t
Application Fields: ore beneficiation industry and steel making industry
Applicable Materials: metal powder
Metal powder dryer, also known as iron ore concentrate ball dryer or copper concentrate dryer, is a special piece of drying equipment developed for drying waste metal powder.It can effectively reduce the material moisture and eliminate oil contamination. After the wet materials are added into the dryer, with the ruffle of the uniform distributed board device in the barrel, the materials are distributed and dispersed and are fully exposed to the concurrent flow air and countercurrent flow air which accelerate drying and transferring heat and mass.
Metal powder dryer is used for the drying of large particles or heavy particles in chemical, mining, metallurgy and other industries such as metal powder, ultra-fine metal powder, high purity metal powders, superfine metal powder, iron, raw iron, iron, aluminum scrap, aluminum powder, crushed aluminum scrap, copper, copper powder, copper scrap, copper sludge, tin foot waste, pin waste, solder waste, ores, blast furnace slag,coal, metal powder, phosphate, ammonium sulfate, etc.
1. The iron ore concentrate ball dryer or copper concentrate dryer has a high degree of mechanization and large production capacity.
2. The fluid flows through the barrel with a low obstruction and low power dissipation.
3. Metal powder dryer has a strong adaptability to materials.
4. Metal powder dryer is stable in operation, low in operation cost, and good homogeneity in the dried products.
The solid of revolution is the main part of the metal powder dryer and it is also called drying cylinder. The drying cylinder is a rotating cylinder with slight incline to the horizontal line. The materials are sent from the higher end and the heat-carrying agents are sent from the lower end to form counter current contact. Some heat-carrying agents and materials flow altogether into the end of the barrel under gravity with the rotation of the cylinder. In the process of moving forwardness in the drum, the wet materials directly or indirectly gain the heat of the heat-carrying agent and are dried.
Spec./m
(Dia.×Length) |
Shell Cubage
(m³) |
Capacity
(t/h) |
Installation
Obliquity (%) |
Highest Inlet
Air Temperature (℃) |
Main Motor
(kw) |
Weight
(t) |
Φ1.2×8.0
|
9.0
|
1.9~2.4
|
3~5
|
700~800
|
7.5
|
9
|
Φ1.2×10
|
11.3
|
2.4~3.0
|
3~5
|
700~800
|
7.5
|
11
|
Φ1.5×12
|
21.2
|
4.5~5.7
|
3~5
|
700~800
|
15
|
18.5
|
Φ1.5×14
|
24.7
|
5.3~6.6
|
3~5
|
700~800
|
15
|
19.7
|
Φ1.5×15
|
26.5
|
5.7~7.1
|
3~5
|
700~800
|
15
|
20.5
|
Φ1.8×12
|
30.5
|
6.5~8.1
|
3~5
|
700~800
|
18.5
|
21.5
|
Φ1.8×14
|
35.6
|
7.6~9.5
|
3~5
|
700~800
|
18.5
|
23
|
Φ2.2×12
|
45.6
|
9.7~12.2
|
3~5
|
700~800
|
22
|
33.5
|
Φ2.2×14
|
53.2
|
11.4~14.2
|
3~5
|
700~800
|
22
|
36
|
Φ2.2×16
|
60.8
|
13.0~16.2
|
3~5
|
700~800
|
22
|
38
|
Φ2.4×14
|
63.3
|
13.5~16.9
|
3~5
|
700~800
|
37
|
45
|
Φ2.4×18
|
81.4
|
17.4~21.7
|
3~5
|
700~800
|
37
|
49
|
Φ2.4×20
|
90.4
|
19.3~24.1
|
3~5
|
700~800
|
45
|
54
|
Φ2.4×22
|
99.5
|
21.2~26.5
|
3~5
|
700~800
|
45
|
58
|
Φ2.6×24
|
127.4
|
27.2~34.0
|
3~5
|
700~800
|
55
|
73
|
Φ3.0×20
|
141.3
|
30.1~37.7
|
3~5
|
700~800
|
75
|
85
|
Φ3.0×25
|
176.6
|
37.7~47.1
|
3~5
|
700~800
|
75
|
95
|
Φ3.2×25
|
201
|
42.9~53.6
|
3~5
|
700~800
|
90
|
110
|
Φ3.6×28
|
285
|
60.8~76.0
|
3~5
|
700~800
|
160
|
135
|
Technical parameters of indirect heat dryer:
Shell diameter ×shell Length Items |
Inside diameter of outer shell (mm) |
Inside diameter of inner shell (mm) |
Shell Length (m) |
Shell cubage (m³) |
Shell obliquity |
Lifting blade form |
Highest inlet air temperature (℃) |
Dimensions (m) |
Φ1.5×15m | 1500 | 500 | 15 | 20.27 | 3-5% | Lifting form | 850 | 16.2×2.7×2.7 |
Φ1.5×17m | 17 | 22.97 | 18.2×2.7×2.7 | |||||
Φ1.5×19m | 19 | 25.68 | 20.0×2.9×2.9 | |||||
Φ1.8×21m | 1800 | 650 | 21 | 35.91 | 3-5% | Lifting form | 850 | 22.5×2.7×2.7 |
Φ1.8×23m | 23 | 39.33 | 24.5×2.9×2.9 | |||||
Φ1.8×25m | 25 | 42.75 | 26.5×2.9×2.9 | |||||
Φ2.2×21m | 2200 | 800 | 21 | 58.10 | 3-5% | Lifting form | 850 | ---- |
Φ2.2×23m | 23 | 63.61 | ||||||
Φ2.2×25m | 25 | 69.15 |
China Fote Machinery Co., Ltd. Add: High and New Industrial Zone, Kexue Avenue, High and New Technology Industrial Development Zone, Zhengzhou, China.
Phone: 0086-371-63313738 Mobile Phone: 0086-18039114854 Email: market@sinoftm.com SiteMap: Sitemap