Fluorite Powder Dryer

Fluorite Powder Dryer

Key Specifications

Power: 3-75kw

Production capacity: 0.5-40t/h

Rotation speed: 1.5-8r/min

Weight: 2.9-104.9t

Application Fields: industries of slag, sand, construction materials, metallurgy, chemical engineering, coal, mining, etc.


Minerals Processed

Applicable Materials: fluorite powder, slag, sand, coal, clay, limestone, ardealite, dry-mixed mortar, grain slag, coal slime, etc.

  • Slag
  • Limestone

Get the Latest Discount

If you want to buy the product, contact us immediately, product prices will have a greater discount!

Overview

Fluorite Powder Dryer Introduction

Fluorite powder dryer, also called fluorite dryer, is a kind of ideal drying equipment used in metallurgy, chemical industry, construction and other industries. It is easy to control and has reliable performance. It has high adaptability to materials and is capable of dealing with various materials. With simple structure and stable operation, fluorite powder drying machine has been enjoying high popularity in both domestic and foreign markets.

Fluorite Powder Dryer

Fluorite Powder Dryer

Fluorite Powder Dryer

Fluorite Powder Dryer

Fluorite Powder Dryer Applied Fields:

Fluorspar powder dryer is used to dry slime, fluorite powder, sludge, slag, sand, and other materials. Because of its stable performance, advanced technology, high output, low energy consumption, small footprint, and high degree of mechanization, our fluorite dryer is widely used in building materials, metallurgy, ore dressing, chemical, cement and other industries.

Fluorite Powder Dryer

Maintenance Notes of Fluorite Powder Dryer

1. Lubricant must be clean and sealed well.
2. Pay attention to the quick- wear parts and replace the worn parts.
3. Make sure that each part of the machine works normally.
4. Switch off the machine and check if the bearings overheat.

Fluorite Powder Dryer Factory

Fluorite Powder Dryer Principle

When the fluorite powder dryer is running, the materials and hot air enter in the way of parallel flow. Under the action of spiral plate, throwing plate and guiding plate, the materials are scattered and the heat of the hot air is transferred to them. They move forwards along the inner cone wall and then enter the space between the inner and outer cylinder, where the materials are raised by the lifting device and then fall to the stripper plate attached to the outer wall of the inner cone cylinder. Then the materials move toward the discharging port along the outer cone wall. Afterwards, the finished products are discharged from the clack valve and the exhaust gas is discharged above the stripper hood and into the air after dust abatement.

Fluorite Powder Dryer Work Site

Technology Data

Spec./m
(Dia.×Length)
Shell Cubage
(m³)
Capacity
(t/h)
Installation
Obliquity
(%)
Highest Inlet
Air Temperature
(℃)
Main Motor
(kw)
Weight
(t)
Φ1.2×8.0
9.0
1.9~2.4
3~5
700~800
7.5
9
Φ1.2×10
11.3
2.4~3.0
3~5
700~800
7.5
11
Φ1.5×12
21.2
4.5~5.7
3~5
700~800
15
18.5
Φ1.5×14
24.7
5.3~6.6
3~5
700~800
15
19.7
Φ1.5×15
26.5
5.7~7.1
3~5
700~800
15
20.5
Φ1.8×12
30.5
6.5~8.1
3~5
700~800
18.5
21.5
Φ1.8×14
35.6
7.6~9.5
3~5
700~800
18.5
23
Φ2.2×12
45.6
9.7~12.2
3~5
700~800
22
33.5
Φ2.2×14
53.2
11.4~14.2
3~5
700~800
22
36
Φ2.2×16
60.8
13.0~16.2
3~5
700~800
22
38
Φ2.4×14
63.3
13.5~16.9
3~5
 
700~800
37
45
Φ2.4×18
81.4
17.4~21.7
3~5
700~800
37
49
Φ2.4×20
90.4
19.3~24.1
3~5
700~800
45
54
Φ2.4×22
99.5
21.2~26.5
3~5
700~800
45
58
Φ2.6×24
127.4
27.2~34.0
3~5
700~800
55
73
Φ3.0×20
141.3
30.1~37.7
3~5
700~800
75
85
Φ3.0×25
176.6
37.7~47.1
3~5
700~800
75
95
Φ3.2×25
201
42.9~53.6
3~5
700~800
90
110
Φ3.6×28
285
60.8~76.0
3~5
700~800
160
135

Technical parameters of indirect heat dryer:

  Shell 
diameter
×shell 
Length  
Items
Inside 
diameter 
of outer 
shell
(mm)
Inside 
diameter 
of inner 
shell
(mm)
Shell
 Length
(m)
Shell
 cubage
(m³)
Shell 
obliquity
Lifting 
blade
 form
Highest 
inlet air
 temperature
(℃)
Dimensions
(m)
Φ1.5×15m 1500 500 15 20.27 3-5% Lifting form 850 16.2×2.7×2.7
Φ1.5×17m 17 22.97 18.2×2.7×2.7
Φ1.5×19m 19 25.68 20.0×2.9×2.9
Φ1.8×21m 1800 650 21 35.91 3-5% Lifting form 850 22.5×2.7×2.7
Φ1.8×23m 23 39.33 24.5×2.9×2.9
Φ1.8×25m 25 42.75 26.5×2.9×2.9
Φ2.2×21m 2200 800 21 58.10 3-5% Lifting form 850 ----
Φ2.2×23m 23 63.61
Φ2.2×25m 25 69.15

Get Latest Price

If you need the latest price list, please leave us a message here, thank you! We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.Tell us your needs, there will be more favorable prices!

  • *
  • *

Contact us

China Fote Machinery Co., Ltd. Add: High and New Industrial Zone, Kexue Avenue, High and New Technology Industrial Development Zone, Zhengzhou, China.

Phone: 0086-371-63313738 Mobile Phone: 0086-18039114854 Email: market@sinoftm.com SiteMap: Sitemap

Products

Here is our best selling product.