Study on Transmission of Fote Wood Shavings Dryer

     Date: 12-07-2016     From: Fote Machinery     Author: Fote Machinery

The working situation of wood chip dryer should be stable and drum should not vibrate during the working process. It is required that mechanical parts should have certain machining precision and dynamo should have the feature to smoothly adjust the working speed.

When jet flow is ejected out from spraying mouth and ejection speed gradually decreases to the point that is similar with the flame spread speed, burning process should be kept stably. According to the type and working capacity of kiln, we make the thermodynamic calculation.

According to the balance of materials and heat, we can count the desired amount of fuel and air for burning 1kg materials. Then, according to the proportion of total air amount and primary air amount, we can confirm the reasonable matching of wind volume and speed between wind flow, coal flow and exterior wind flow in burner.

Transmission is very important for wood chip dryer. As a large-sized wood chip dryer, Fote Machinery has deep researches and studies on the transmission of wood shavings dryer. Then, let’s discuss about the detailed demands and advantages for transmission of wood chip dryer in detail.

Drive ratio of wood chip dryer is very large. Revolving speed of wood chip dryer is very slow. If being equipped with the dynamo with ordinary revolving speed, drive ratio of transmission is at about 500 to 700. Therefore, great peripheral force is produced on the low-speed gear.

For the current study on transmission, it is to produce the simple and advanced reducer under the situation of large ratio and great torque. See price on website!